Pro-HC. Use this rugged, professional-grade Wi-Fi controller for residential and light commercial applications. Number of Stations 6, 12, 24. Type Fixed. Wi-Fi Enabled. Save time: Manage irrigation from anywhere using your smartphone, tablet, or computer. The NODE-100 is provided with a solenoid attached to the controller. The NODE-100-LS does not include a solenoid. The NODE-200, NODE-400, and NODE-600 multi-station controllers will operate up to two, four, or six solenoids, respectively. Hunter DC-latching solenoids (P/N 458200) can easily be installed on all Hunter plastic valves. Be within 10’ (3 m) of the controller. Smartphone or computer does not show the WAND Wi-Fi network. Hydrawise App cannot communicate with the WAND. Check if X2 LCD shows SAP and reconnect. To place in SAP mode, press the WAND Wi-Fi button twice. Connect to the WAND Wi-Fi network in your device’s settings. Disable mobile data. N-key-rollover feature so that each key-press is detected individually. Allows multiple keys to work simultaneously, great for gamers. 04-1098A. Wrist rest and foldable posts provide a comfortable position to prevent fatigue after long periods of use. Solid construction with aluminum faceplate makes it extra durable. Advanced Hunter Sensors offer the ability to turn controllers into smart controllers. They ensure irrigation works in sync with the weather and that run times are always optimal. The Solar Sync ET sensor is an advanced weather sensor that calculates evapotranspiration (ET) and adjusts Hunter controllers daily based on local weather conditions. I have a Hunter X-Core irrigation controller (8 zones) and I wanted to integrate it into homeassistant for better control. I had planned to add a relay to open the valves and bypass the controller (turned off) but I found out that there is a pin exposed for remote control. I found this project and I want to build it using ESPHome. Press the PRG button until the display reads "program A. Turn the dial to "Set watering start times". Use the + or - keys to "Start time #1" for 8:00 a.m. Press the right arrow button to advance to "Start time #2". Use the + or - keys to set "Start time #2" to the "off" position. Repeat for start times 3-4. X-CORE COMPONENTS LCD Display 1 Run Times Allows user to set each valve station run time from 1 minute to 4 hours 2 Start Times Allows 1 to 4 start times to be set in each program 7Jpz1G.

hunter x core will not reset